Launching Soon

DIY Wardrobe Makeover

Anyone else just lay awake thinking about projects...?

I know it sounds stupid for something so minor to bug someone so much but hey that’s me!!

These wardrobe doors had always bugged me since we first moved in, I just used to stare at them randomly in bed, it felt like an itch I couldn’t scratch because I couldn’t figure out a cheap/easy way to update them to be more elegant/modern looking.

Then I kid you not the 24 hours before I was due to fly to Spain for a long weekend and then spend a week in centre parcs with my family I had that wave of inspiration that if you’ve ever felt it… it’s relentless! Your brain literally doesn’t stop whirring and I started getting itchy! 

So instead of packing, tidying, planning… all the things I should have been doing before going on holiday! I went to Wickes, stocked up on beading, ply and adhesive and set to work, transforming what I can only describe as builder-grade 90s wardrobe doors into something I feel looks quite unique! 

Ok so let’s dive in, 

below is a list of materials and tools you will need for this project, I have linked where possible to the tools I personally used but as always there is more than one way to skin a cat so if you don’t have said particular tool (for example a nail gun) you can always use the old fashioned hand tool version (in this case a hammer and nails). 

and then break down each step into manageable step-by-step instructions to hopefully make this. as simple as possible. 

WHAT you will need:

Step by step instructions:

1. Measure the dimensions of the wardrobe doors, and calculate the amount of plywood, pole wrap, and beading needed.

2. Cut the plywood with your circular saw/jigsaw (whatever cutting tool you own) so you have 2 panels that cover the old detail on the top and bottom, you also want to cut a 10cm thick panel at the same width as the other two panels for the middle detail.

3. Attach the plywood to the doors using no more nails and your nail gun.

4. You then want to cut your pole wrap to size and attach it to the middle panel, I found the best way to cut pole wrap is to use a jigsaw, it tends to splinter the least using that method, and then just run a Stanley knife down the vertical strips.

5. You will then want to attach that to the middle panel with some more adhesive.

6. Cut some pole wrap down to individual strips using your Stanley knife, trim it to size and then mitre cut it at the edges at a 45-degree angle using your mitre shears.  

6. Attach the pole wrap strips on top of the plywood to build it up a little more so that when you add beading it doesn’t sit as high against the ply.

7. Cut the beading to size, and also at a 45-degree angle, you want to cut this slightly bigger than the ply as the trim frames it so the maths is (ply + 2x trim width). So in my case, the trim is 9mm so I just added 18mm to the length of my ply which meant when I cut the mitres it was a perfect length. 

8. Use wood filler to fill the joins and any holes from the nails, wait for it to dry before sanding it back.

9. Caulk all the seams for that ‘seamless’ finish.

10. Paint everything in a desired shade of wall paint. I chose the colour PAMPAS from Frenchic 

 

13. Add the hardware you like to finish off your project! I chose these. But you might also want to check out my Amazon storefront for all my favourite bargain handles HERE

 

And there you have it – brand new (not so new) doors!! 🖤

I hope this was helpful as always let me know if you have any questions at all

love Abi x

for a video tutorial of this head on over to Instagram HERE

Share with friends

Leave a Reply

Your email address will not be published. Required fields are marked *

Your Cart

Your basket is currently empty.

Return to shop